Neptun Trailer

Pro N7-210 prr [GN214]

Pro

model: N7-210 prr [GN214]

  • Very strong frame by 2 through-going U-profiled longitudinal chassis beams as well as 3 horizontal chassis beams.
  • PRO gives you the possibility to unscrew all 4 side panels and use the trailer as a platform to capitalise the space.
  • With 450 mm high side panels and tip, PRO is a very functional trailer that can be used for many purposes.
  • Eye-lashing rings in each corner are standard on all NEPTUN trailers to fully secure and tie-down the cargo.
  • Cover tie-down buttons are standard on all NEPTUN trailers for easy tie-down of either flat or high covers.
  • V-drawbar with reinforcement.
  • Multi-function tail lights are mounted under the tail gate, thus protected from moist and verdigris, the best possible way.
  • Soft suspension in full range of load – from zero to max. Large payload, very good vibrations damping caused by shock absorbers.
N7-210 prr [GN214]

Type: low-bed

Gross Weight: 750 kg

Payload: 573 kg

Internal dimensions: 210 x 129 x 45 cm

Wheels: 13 ″

Axle: 1

Brakes: No

Front gate: steel

Tilt drawbar: Yes

Pro

1 Rigid and durable design

High durability of the trailer design is ensured by the welded frame and drawbar, cold-bent frame sections of the U-shaped cross section frame and the lateral beams (two or three depending on the model).

2 Two in one

Trailer sidewalls can be easily dismantled. The user gets a flat platform for transporting larger loads.

3 Durable and functional sidewalls

Profiled 450-mm sidewalls are made of high quality zinc-plated steel sheet. They are profiled to be rigid and resistant to impact, and to look attractive. Front sidewall is openable – thus the trailer can be used to transport long loads.

4 Easy load securing

Lashing eyes are located in the corners of the platform. Because they are fitted to the floor and to the welded frame, the load can be secured more effectively.

5 Lamp protection

Multifunction lamps are installed inside the tailgate and under the rear sidewall and therefore protected against damage, moisture and mud. Cable connections are well protected, guaranteeing long-lasting maintenance-free operation.

 

Accessory GN212 GN214 GN065 GN023 GN180 GN159 GN182 GN164 GN082 GN198 GN148 GN199
Name N7-210 pro N7-210 prr N7-236 pro g N7-236 pro N7-236 prr N7-263 pro N7-263 prr N7-350 CT N7-236 2 pro N7-236 2 pro+ N7-263 2 pro N7-263 2 pro+
Flat Cover, 520 g/m2, Grey AP266 AP266 AP121 AP121 AP121 AP229 AP229 - AP121 AP121 AP229 AP229
Flat Cover, 650 g/m2, Grey AP267 AP267 AP042 AP042 AP042 AP233 AP233 - AP042 AP042 AP233 AP233
Support Bar for Flat Cover, adjustable GA257 GA257 GA257 GA257 GA257 GA257 GA257 - GA257 GA257 GA257 GA257
High Cover w/ Strap Fasteners, 400 mm, 520 g/m2, Grey - - AP131 AP131 AP131 AP230 AP230 - AP131 AP131 AP230 AP230
High Cover w/ Strap Fasteners, 400 mm, 650 g/m2, Grey - - AP053 AP053 AP053 AP234 AP234 - AP053 AP053 AP234 AP234
Hoops for High Cover, 400 mm - - GA208 GA208 GA208 GA342 GA342 - GA208 GA208 GA342 GA342
High Cover w/ Strap Fasteners, 800 mm, 650 g/m2, blue - - AP203 AP203 AP203 - - - AP203 AP203 - -
High Cover w/ Strap Fasteners, 800 mm, 520 g/m2, Grey AP268 AP268 AP122 AP122 AP122 AP231 AP231 - AP122 AP122 AP231 AP231
High Cover w/ Strap Fasteners, 800 mm, 650 g/m2, Grey AP269 AP269 AP043 AP043 AP043 AP235 AP235 - AP043 AP043 AP235 AP235
Hoops for High Cover, 800 mm GA399 GA399 GA219 GA219 GA219 GA346 GA346 - GA219 GA219 GA346 GA346
High Cover w/ Strap Fasteners, 1200 mm, 520 g/m2, Grey - - AP135 AP135 AP135 AP232 AP232 AP239 AP135 AP135 AP232 AP232
High Cover w/ Strap Fasteners, 1200 mm, 650 g/m2, Grey - - AP057 AP057 AP057 AP236 AP236 AP256 AP057 AP057 AP236 AP236
Hoops for High Cover, 1200 mm - - GA220 GA220 GA220 GA339 GA339 GA349 GA220 GA220 GA339 GA339
Mesh Side Kit, 395 mm - - GA035 GA035 GA035 GA335 GA335 - GA035 GA035 GA335 GA335
Side Extension Kit, 370 mm GA400 GA400 GA059 GA059 GA059 GA334 GA334 - GA059 GA059 GA334 GA334
Ladder Rack and Side Rail Kit - - GA022 GA022 GA022 GA336 GA336 - GA022 GA022 GA336 GA336
Load Bar Rack Kit GA018 GA018 GA018 GA018 GA018 GA018 GA018 - GA018 GA018 GA018 GA018
Spare Wheel, 155/70 R13, 4x98 mm KK014 KK014 - - - - - KK014 KK014 KK014 KK014 KK014
Spare Wheel, 165/70 R13, 4x98 mm - - KK006 KK006 KK006 KK006 KK006 - - - - -
Spare Wheelsholder, Trækstang GA159 GA159 GA159 GA159 GA159 GA159 GA159 - GA159 GA159 GA159 GA159
Spare Wheelsholder, side GA099 GA099 GA099 GA099 GA099 GA099 GA099 GA360 GA099 GA099 GA099 GA099
Spare Wheelsholder, under - - GA098 GA098 GA098 GA098 GA098 - - - - -
Anti-theft, Steel Locking Shoe w/ Key AU090 AU090 AU090 AU090 AU090 AU090 AU090 AU090 AU090 AU090 AU090 AU090
Anti-theft, Box Lock w/ Padlock AU121 AU121 AU121 AU121 AU121 AU121 AU121 AU121 AU121 AU121 AU121 AU121
Anti-theft, Coupling Lock w/ Key AU059 AU059 AU059 AU059 AU059 AU059 AU059 AU059 AU059 AU059 AU059 AU059
Clamp for Jockey Wheel and Prop Stand, 200 mm OK002 OK002 OK002 OK002 OK002 OK002 OK002 OK002 OK002 OK002 OK002 OK002
Jockey Wheel, 200 mm KM002 KM002 KM002 KM002 KM002 KM002 KM002 KM002 KM002 KM002 KM002 KM002
Jockey Wheel w/ Clamp, 200 mm GA227 GA227 GA227 GA227 GA227 GA227 GA227 GA227 GA227 GA227 GA227 GA227
Prop Stand, 700 mm KM006 KM006 KM006 KM006 KM006 KM006 KM006 KM006 KM006 KM006 KM006 KM006
Loading Ramp, 1680 x 180 mm GA171 GA171 GA171 GA171 GA171 GA171 GA171 - GA171 GA171 GA171 GA171
Channel w/ Bracket, 2200 x 175 mm - - GZ552 GZ552 GZ552 GZ552 GZ552 - GZ552 GZ552 GZ552 GZ552
Rear panel board - driveway GA319 GA319 - GA319 GA319 GA319 GA319 - GA319 - GA319 -
Shock Absorber, 750 kg QS008 - - QS008 - QS008 - - - - - -
Shock Absorber Kit, 750 kg GZ598 - - GZ598 - GZ598 - - - - - -
Design for the transport of boats - - - - - - - GA369 - - - -
Additional side supports for GA369 - - - - - - - GA370 - - - -
Winch base - - - - - - - GL057 - - - -
Gas Spring - - - QS009 QS009 QS009 QS009 QS009 - - - -
Gas Spring, Fitting for Drawbar - - - GZ506 GZ506 GZ506 GZ506 - - - - -
Gas Spring, Fitting for Chassis - - - GZ594 GZ594 GZ594 GZ594 - - - - -
Winch w/ Belt , 450 kg  - - - - - - - QS011 - - - -

 

Accessory GN136 GN037 GN133 GN173 GN174 GN175 GN203 GN204 GN205
Name N07-236 pro N13-236 pro N16-236 pro N10-253 pro N13-253 pro N16-253 pro N07-263 2 pro N13-263 2 pro N16-263 2 pro
Flat Cover, 520 g/m2, Grey AP121 AP121 AP121 AP246 AP246 AP246 AP229 AP229 AP229
Flat Cover, 650 g/m2, Grey AP042 AP042 AP042 AP247 AP247 AP247 AP233 AP233 AP233
Support Bar for Flat Cover, adjustable GA257 GA257 GA257 GA257 GA257 GA257 GA257 GA257 GA257
High Cover w/ Strap Fasteners, 400 mm, 520 g/m2, Grey AP131 AP131 AP131 - - - AP230 AP230 AP230
High Cover w/ Strap Fasteners, 400 mm, 650 g/m2, Grey AP053 AP053 AP053 - - - AP234 AP234 AP234
Hoops for High Cover, 400 mm GA208 GA208 GA208 - - - GA342 GA342 GA342
High Cover w/ Strap Fasteners, 800 mm, 650 g/m2, blue AP203 AP203 AP203 - - - - - -
High Cover w/ Strap Fasteners, 800 mm, 520 g/m2, Grey AP122 AP122 AP122 AP242 AP242 AP242 AP231 AP231 AP231
High Cover w/ Strap Fasteners, 800 mm, 650 g/m2, Grey AP043 AP043 AP043 AP244 AP244 AP244 AP235 AP235 AP235
Hoops for High Cover, 800 mm GA219 GA219 GA219 GA373 GA373 GA373 GA346 GA346 GA346
High Cover w/ Strap Fasteners, 1200 mm, 520 g/m2, Grey AP135 AP135 AP135 AP243 AP243 AP243 AP232 AP232 AP232
High Cover w/ Strap Fasteners, 1200 mm, 650 g/m2, Grey AP057 AP057 AP057 AP245 AP245 AP245 AP236 AP236 AP236
Hoops for High Cover, 1200 mm GA220 GA220 GA220 GA374 GA374 GA374 GA339 GA339 GA339
Mesh Side Kit, 395 mm GA035 GA035 GA035 GA376 GA376 GA376 GA335 GA335 GA335
Side Extension Kit, 370 mm GA059 GA059 GA059 GA353 GA353 GA353 GA334 GA334 GA334
Ladder Rack and Side Rail Kit GA022 GA022 GA022 GA352 GA352 GA352 GA336 GA336 GA336
Load Bar Rack Kit GA018 GA018 GA018 GA018 GA018 GA018 GA018 GA018 GA018
Spare Wheel 165/70 R13, 4 x 100 KK026 - - - - - KK026 KK026 -
Spare Wheel, 185/70 R13 , 4x100 mm - - - KK007 - - - - KK007
Spare Wheel, 185 R14C, 5x112 mm - KK008 KK008 - KK008 KK008 - - -
Spare Wheelsholder, side GA099 - - - - - GA099 GA099 -
Spare Wheelsholder, under - GA098 GA098 GA098 GA098 GA098 - - GA098
Anti-theft, Box Lock w/ Padlock AU121 AU121 AU121 AU121 AU121 AU121 AU121 AU121 AU121
Clamp for Jockey Wheel and Prop Stand, 200 mm OK002 OK002 OK002 OK002 OK002 OK002 OK002 OK002 OK002
Jockey Wheel, 200 mm KM002 KM002 KM002 KM002 KM002 KM002 KM002 KM002 KM002
Jockey Wheel w/ Clamp, 200 mm GA227 GA227 GA227 GA227 GA227 GA227 GA227 GA227 GA227
Prop Stand, 700 mm KM006 KM006 KM006 KM006 KM006 KM006 KM006 KM006 KM006
Channel w/ Bracket, 2200 x 175 mm GZ552 GZ552 GZ552 GZ552 GZ552 GZ552 GZ552 GZ552 GZ552
Loading Ramp, 1680 x 180 mm GA171 GA171 GA171 GA171 GA171 GA171 GA171 GA171 GA171
Rear panel board - driveway GA319 GA319 GA319 GA319 GA319 GA319 GA319 GA319 GA319
Gas Spring, Fitting for Drawbar-Chassis GZ898 GZ898 GZ898 GZ898 GZ898 GZ898 - - -
Shock Absorbers, AL-KO HA003 HA003 HA005 HA003 HA003 HA005 HA003 HA003 HA003
Shock Absorber Fittings, plug-in, AL-KO HA007 HA004 HA006 HA004 HA004 HA006 HA007 HA007 HA004

6 Easy unloading

All PRO models have a tilting loading platform making it easy to remove the load from the trailer.

Why invest in a trailer?

  • you will become independent from trailer rental outlets and transport companies,
  • you will reduce costs related to serial transport of goods and equipment,
  • no need to buy a larger car,
  • you will avoid trouble connected with renting a trailer,
  • you will not have to ask your friends for help,
  • you will increase your comfort.